Skip to main content

Diastolic Dysfunction on Echocardiography: The 5 Parameters You Need to Know

Diastolic Dysfunction on Echocardiography: The 5 Parameters You Need to Know

Diastology


Have you ever performed an echocardiogram on a patient with breathlessness, preserved ejection fraction and apparently normal LV systolic function, but still suspected heart failure?

This is a common clinical scenario. A patient may have an LVEF of 60%, no obvious regional wall motion abnormality, and yet complain of exertional dyspnea, orthopnea or reduced exercise tolerance.

The problem may not be systolic function. It may be related to impaired relaxation or increased stiffness of the left ventricle.

This is why assessment of left ventricular diastolic function is an essential part of a comprehensive echocardiographic examination.

In this article, we will discuss five important echocardiographic parameters, understand their clinical significance and explore a practical approach to grading diastolic dysfunction according to contemporary recommendations.


What Is Diastolic Dysfunction?

Diastolic dysfunction refers to an abnormality in ventricular relaxation, compliance or filling.

Normally, during diastole, the left ventricle relaxes and fills with blood coming from the left atrium without requiring excessive filling pressure.

When relaxation becomes impaired or the ventricle becomes stiff, higher left atrial pressure may be required to maintain adequate ventricular filling.

Common clinical associations include:

  • Long-standing hypertension
  • Left ventricular hypertrophy
  • Ischaemic heart disease
  • Diabetes mellitus
  • Hypertrophic cardiomyopathy
  • Age-related myocardial changes
CLINICAL PEARL

A preserved ejection fraction does not necessarily mean normal diastolic function. Always assess both systolic and diastolic function when clinically indicated.

The 5 Essential Echocardiographic Parameters

1. Mitral Inflow E/A Ratio

The first parameter to assess is transmitral inflow using pulsed-wave Doppler.

Place the sample volume at the tips of the mitral valve leaflets in the apical four-chamber view.

You will identify two major waves:

  • E wave: Early passive ventricular filling.
  • A wave: Late ventricular filling due to atrial contraction.

The E/A ratio is calculated by dividing the peak E-wave velocity by the peak A-wave velocity.

E/A Ratio = E-wave velocity ÷ A-wave velocity

How to interpret it:

E/A Ratio Possible Pattern
≤0.8 Impaired relaxation may be present
0.8–2.0 Normal or pseudonormal pattern
≥2.0 Restrictive filling pattern may be present

In impaired relaxation, early filling decreases and atrial contraction contributes more to ventricular filling.

In advanced dysfunction, increased left atrial pressure may increase the E wave again, producing a restrictive pattern.

Important: E/A ratio alone cannot reliably diagnose or grade diastolic dysfunction. A pseudonormal pattern may appear deceptively normal.

2. Tissue Doppler e′ Velocity

Tissue Doppler is one of the most useful methods for evaluating myocardial relaxation.

Unlike conventional Doppler, which measures blood flow, tissue Doppler evaluates the movement of the mitral annulus.

Measure e′ at two sites:

  • Septal mitral annulus.
  • Lateral mitral annulus.

A reduced e′ velocity suggests impaired myocardial relaxation.

Parameter Reduced Value
Septal e′ ≤6 cm/s
Lateral e′ ≤7 cm/s
Average e′ ≤6.5 cm/s

These are thresholds from the 2025 ASE recommendations. Interpret them with age, loading conditions and clinical context in mind.

PRACTICAL TIP

Record both septal and lateral e′ whenever technically feasible. Do not rely on a single measurement if both sites are obtainable.

3. E/e′ Ratio

The E/e′ ratio is an important parameter used to estimate LV filling pressure.

It combines conventional mitral inflow E velocity with tissue Doppler e′ velocity.

E/e′ = E velocity ÷ e′ velocity

According to the 2025 ASE recommendations, the following values support elevated filling pressure:

  • Septal E/e′ ≥15.
  • Lateral E/e′ ≥13.
  • Average E/e′ ≥14.

Why is this important?

Mitral E velocity is influenced by left atrial pressure as well as LV relaxation. Tissue Doppler e′ provides information about myocardial relaxation. Combining these measurements helps estimate LV filling pressure.

Clinical example:

Consider a hypertensive patient with preserved LVEF, reduced e′ velocity and an average E/e′ of 16. This finding raises suspicion of elevated LV filling pressure, particularly when supported by other echocardiographic parameters.

Remember that E/e′ is an estimate, not a direct measurement of LV end-diastolic pressure.

4. Left Atrial Volume Index (LAVI)

The left atrium can be considered a window into the chronic filling pressure of the left ventricle.

When LV filling pressure remains elevated over time, the left atrium is exposed to increased pressure and may gradually enlarge.

LA volume should be measured using the biplane method of disks from apical four-chamber and two-chamber views. Avoid foreshortening.

Index the measured volume to body surface area.

Normal LAVI: ≤34 mL/m²

Values above 34 mL/m² indicate left atrial enlargement.

However, LA enlargement is not specific to diastolic dysfunction. Atrial fibrillation, mitral valve disease and other conditions can also increase LA volume.

In the 2025 ASE approach, LAVI is an important supplementary parameter when the initial assessment is inconclusive.

5. Tricuspid Regurgitation (TR) Velocity

At first glance, TR velocity may seem unrelated to LV diastolic function. However, it provides useful information about pulmonary artery pressure.

When left atrial pressure increases, pressure can be transmitted backwards through the pulmonary veins and pulmonary circulation. This may eventually result in increased pulmonary artery pressure.

TR velocity is measured using continuous-wave Doppler across the tricuspid regurgitant jet.

RV–RA Gradient = 4 × (TR velocity)²

Right atrial pressure is added to estimate RV systolic pressure when there is no RV outflow obstruction.

Important thresholds:

  • Peak TR velocity ≥2.8 m/s supports the possibility of elevated pulmonary pressure.
  • PASP ≥35 mmHg is another threshold used in the 2025 ASE algorithm when right atrial pressure can be estimated.

But there is an important limitation: pulmonary hypertension can occur due to lung disease, pulmonary vascular disease and other causes unrelated to elevated left atrial pressure.

Therefore, TR velocity should never be interpreted without considering the clinical context and other echocardiographic findings.


How to Grade Diastolic Dysfunction?

This is where many beginners become confused.

It is tempting to look at the E/A ratio, assign Grade I, II or III, and move on. Unfortunately, diastolic assessment is not that simple.

The 2025 ASE recommendations provide an updated multiparametric approach to assessing diastolic function and estimating left atrial pressure.

Initial Assessment: Three Important Variables

In patients in sinus rhythm without relevant exclusions, the initial assessment uses three variables:

  1. Mitral annular e′ velocity.
  2. E/e′ ratio.
  3. TR velocity or estimated pulmonary artery systolic pressure.

The important thresholds are:

Variable Abnormal Finding
Septal e′ ≤6 cm/s
Lateral e′ ≤7 cm/s
Average E/e′ ≥14
TR velocity ≥2.8 m/s
PASP ≥35 mmHg

If all three primary variables are normal, normal filling pressure and normal diastolic function are supported.

If all three are abnormal, elevated left atrial pressure is supported.

When findings are discordant or only some variables are abnormal, additional parameters are required.

Supplementary Parameters

When the initial assessment is inconclusive, the following measurements can help:

  • Left atrial volume index greater than 34 mL/m².
  • Left atrial reservoir strain ≤18%.
  • Pulmonary vein systolic/diastolic velocity ratio ≤0.67.
  • Isovolumic relaxation time ≤70 ms.

These measurements should be interpreted within the appropriate diagnostic pathway rather than used as independent diagnostic tests.

Understanding Grades I, II and III

Grade Description Filling Pressure
Grade I Impaired relaxation Usually normal at rest
Grade II Pseudonormal filling Elevated
Grade III Restrictive filling Markedly elevated

Once elevated filling pressure is established, the mitral inflow pattern helps distinguish Grade II from Grade III in the relevant 2025 ASE pathway:

  • E/A less than 2: Grade II pattern.
  • E/A ≥2: Grade III pattern.

These grades should not be assigned from E/A alone. The full guideline algorithm, clinical context and applicable exclusions matter.


Common Mistakes When Assessing Diastolic Function

Even experienced echocardiographers can encounter difficulties when interpreting diastolic parameters. Here are some common mistakes worth avoiding.

  1. Using E/A ratio alone: A normal-looking E/A ratio does not exclude elevated filling pressure.
  2. Ignoring tissue Doppler: Always assess septal and lateral e′ when technically feasible.
  3. Using E/e′ in isolation: It is an estimate, not a direct measurement of LV filling pressure.
  4. Ignoring LA size: LA volume provides useful information about chronic pressure burden.
  5. Misinterpreting TR velocity: Pulmonary hypertension has multiple possible causes.
  6. Ignoring clinical context: Age, heart rate, rhythm, loading conditions and valve disease can affect interpretation.

Important Situations Requiring a Different Approach

The standard sinus-rhythm algorithm is not appropriate for every patient.

Special consideration or dedicated assessment is required in conditions such as:

  • Atrial fibrillation.
  • Significant mitral regurgitation or mitral stenosis.
  • Mitral annular calcification.
  • Pericardial constriction.
  • Heart transplantation.
  • Left ventricular assist device (LVAD).

In atrial fibrillation, for example, the absence of consistent atrial contraction means that conventional E/A assessment is not applicable.

A Practical Clinical Example

Consider a 68-year-old man with long-standing hypertension who presents with progressive exertional breathlessness.

His echocardiogram shows:

  • LVEF: 58%.
  • Septal e′: 5 cm/s.
  • Lateral e′: 6 cm/s.
  • Average E/e′: 16.
  • TR velocity: 3.0 m/s.
  • LAVI: 42 mL/m².

What would you conclude?

Although the LV ejection fraction is preserved, the patient has reduced mitral annular relaxation velocities, elevated E/e′, increased TR velocity and an enlarged left atrium.

These findings strongly support elevated LV filling pressure in the appropriate clinical setting. The overall diastolic grade should then be determined using the complete guideline algorithm, including the mitral inflow pattern.

This is precisely why a comprehensive assessment is more valuable than reporting only an EF.

THINK CLINICALLY

A patient with breathlessness and preserved EF may still have elevated LV filling pressure. Never exclude diastolic dysfunction based on EF alone.

Key Take-Home Messages

  • Diastolic function assessment is an essential part of comprehensive echocardiography.
  • Mitral inflow provides information about LV filling patterns.
  • Tissue Doppler e′ helps assess myocardial relaxation.
  • E/e′ helps estimate LV filling pressure.
  • LAVI provides information about chronic left atrial pressure burden.
  • TR velocity helps identify increased pulmonary pressure.
  • Use a multiparametric approach rather than relying on a single measurement.
  • Always interpret findings in the context of the patient's clinical condition.

Conclusion

Assessing diastolic function is not simply about measuring an E/A ratio or calculating E/e′. It is about understanding the relationship between LV relaxation, left atrial pressure and pulmonary circulation.

When you combine mitral inflow, tissue Doppler, LA volume, TR velocity and the updated ASE algorithm, you can provide a much more meaningful assessment of diastolic function.

The next time you encounter a patient with breathlessness and a preserved EF, remember:

A NORMAL EJECTION FRACTION DOES NOT NECESSARILY MEAN A NORMAL HEART.


References and Further Reading

  1. Nagueh SF, Sanborn DY, Oh JK, et al. Recommendations for the Evaluation of Left Ventricular Diastolic Function by Echocardiography and for Heart Failure With Preserved Ejection Fraction Diagnosis: An Update From the American Society of Echocardiography. Journal of the American Society of Echocardiography. 2025;38(7):537–569. doi:10.1016/j.echo.2025.03.011.
  2. Nagueh SF, Smiseth OA, Appleton CP, et al. Recommendations for the Evaluation of Left Ventric

Comments

Popular posts from this blog

Acute Treatment of Hyperkalemia

Acute Treatment of Hyperkalemia – A Practical, Bedside-Oriented Guide Hyperkalemia is a potentially life-threatening electrolyte abnormality that demands prompt recognition and decisive management. The danger lies not only in the absolute potassium value but in its effects on cardiac conduction, which can rapidly progress to fatal arrhythmias. Acute treatment focuses on three parallel goals: stabilizing the cardiac membrane, shifting potassium into cells, and removing excess potassium from the body. Understanding this stepwise approach helps clinicians act quickly and rationally in emergency settings. Why Hyperkalemia Is Dangerous Potassium plays a key role in maintaining the resting membrane potential of cardiac myocytes. Elevated serum potassium reduces the transmembrane gradient, leading to slowed conduction, ECG changes, ventricular arrhythmias, and asystole. Importantly, ECG changes do not always correlate with potassium levels, so treatment decisions should be based on clinical c...

π˜Όπ™£π™©π™žπ™˜π™€π™–π™œπ™ͺπ™‘π™–π™©π™žπ™€π™£ π˜Όπ™›π™©π™šπ™§ π™Žπ™©π™§π™€π™ π™š

 π˜Όπ™£π™©π™žπ™˜π™€π™–π™œπ™ͺπ™‘π™–π™©π™žπ™€π™£ π˜Όπ™›π™©π™šπ™§ π™Žπ™©π™§π™€π™ π™š in  Patient with AF and acute IS/TIA European Heart Association Guideline recommends: • 1 days after TIA • 3 days after mild stroke • 6 days after moderate stroke • 12 days after severe stroke Early anticoagulation can decrease a risk of recurrent stroke and embolic events but may increase a risk of secondary hemorrhagic transformation of brain infarcts.  The 1-3-6-12-day rule is a known consensus with graded increase in delay of anticoagulation between 1 and 12 days after onset of ischemic stroke or transient ischemic attack(TIA), according to neurological severity based on European expert opinions. However, this rule might be somewhat later than currently used in a real-world practical setting.

2025 ESC Guidelines on INR Targets in Mechanical Valves

  2025 ESC Guidelines on INR Targets in Mechanical Valves INR Targets in Patients With Mechanical Heart Valves Updated, guideline-oriented review Mechanical heart valves are inherently thrombogenic and require lifelong anticoagulation. Vitamin K antagonists, particularly warfarin, remain the standard therapy. The international normalized ratio (INR) is used to guide anticoagulation intensity and must be individualized based on valve type, valve position, and patient-related thromboembolic risk factors. Subtherapeutic INR increases the risk of valve thrombosis and systemic embolism, whereas excessive anticoagulation increases bleeding risk. Why INR control is critical Mechanical valves promote thrombosis due to non-physiological blood flow, high shear stress, and continuous contact between blood and artificial surfaces. These prothrombotic mechanisms persist for life. Direct oral anticoagulants are contraindicated in mechanical valves; therefore, VKAs remain mandatory. The goal of I...